{"id":465,"date":"2013-09-18T02:32:29","date_gmt":"2013-09-18T02:32:29","guid":{"rendered":"http:\/\/www.isunshare.com\/blog\/?p=465"},"modified":"2023-04-18T03:52:00","modified_gmt":"2023-04-18T03:52:00","slug":"how-to-add-drivers-to-windows-7-pe-boot-disk","status":"publish","type":"post","link":"https:\/\/www.isunshare.com\/blog\/how-to-add-drivers-to-windows-7-pe-boot-disk\/","title":{"rendered":"How to Add Driver to Windows 7 PE Boot Disk"},"content":{"rendered":"

This post describes how to use dism command to add driver to Windows 7 pe boot disk<\/a>.<\/p>\n

Tips<\/strong>: Here just shows you how to use dism command and add-driver argument to add driver to PE disk. If you want to get more details about how to create a Windows 7 pe disk, see how to create a Windows 7 pe boot disk<\/a>.<\/p>\n

Steps to add driver to Windows 7 pe boot disk:<\/h2>\n
    \n
  1. Use Command to mount windows 7 pe wim image to a folder. For example: DISM \/Mount-Wim \/Wimfile:d:\\winpe5\\winpe.wim \/index:1 \/Mountdir:d:\\winpe5\\Mount<\/i>. d:\\winpe5\\winpe.wim <\/i>is the winpe.wim file path, and d:\\winpe5\\Mount <\/i>is the path the winpe file will mount to. <\/i>\u00a0After this command runs successfully, you can see windows system on d:\\winpe5\\Mount <\/i>folder.<\/i><\/li>\n
  2. Download raid controller driver and and unzip it to a folder.<\/li>\n
  3. Add driver to mount folder. For example: dism \/image:d:\/winpe\/mount \/add-driver \/driver:d:\\driver_x86\\hpp420i\\hpcissx2.inf.<\/i> This commend will add HP p420i raid controller driver to the mount folder. We must specify the *.inf file path.<\/li>\n
  4. Unmount the windows pe image: DISM \/Unmount-Wim \/Mountdir:d:\/winpe\/mount \/Commit.<\/i> When this command runs successfully, the driver has been added to the winpe.wim file.<\/li>\n
  5. Replace the boot.wim file with the winpe.wim file on Windows 7 PE image ISO file.<\/li>\n<\/ol>\n

    Related Article:<\/strong><\/p>\n